6.3K views · 12K reactions | The last step is to assemble. First, we are going to put the frame together and place it. If you look closely, you can see that one side on the upper surface is narrower than the lower. This is because that is where the batten will be where all the slats will hang to open and close together. After we attach the pivots we will attach all the slats. Once the slats are in place we attach the batten to the slats. For this I use a sleeve and bolts of 5mm. Between the batten and the store hook and also between the store hook and the bolt there will be a body washer. To make turning easier. This is why I drilled out that one hole a little more. Because we don’t want tension on those. Once these all hang on, it’s done. Just as simple as that 😉. #festool #festoolme #festoolbelgium #heartwork #carpenter #schrijnwerk #joiner #lamellen #wall #walldecor #interiordesign #interior #interieur #slats #slatswall | Saskia Van Den Berghe
